2014 Honda Crosstour Oil Filter

The filter captures debris carried by the oil, and its capacity is limited. Once it loads, the bypass valve opens so oil circulates without being filtered. The appropriate timing for service is determined by the manufacturer’s schedule, the vehicle’s service history, and inspection.

• Oil and filter service handles both parts together.
• A loaded filter can allow unfiltered oil to circulate.
• The filter is checked for leaks after the engine runs.

The filter is selected for the engine fitted to the vehicle, whether it is the 2.4-liter four-cylinder or 3.5-liter V6. The engine is run after service so the filter seal and surrounding area can be checked. You can schedule appointment with David McDavid Honda of Frisco.

• Filter matched to the engine’s specification
• New drain plug gasket or washer where used
• Leak inspection at the filter seal

The engine still receives oil, but the oil is no longer receiving the filter’s debris-trapping function. Possible signs include an oil-pressure warning, a noisier-than-usual engine, or oil that darkens quickly after a change. An inspection and service history help determine the next appropriate step.

• Debris remains captured less effectively.
• The bypass valve may allow unfiltered oil flow.
• Filter seal areas should be checked for leaks.

The 2014 Honda Crosstour may have a 2.4-liter, 2,354 cc inline four-cylinder engine or a 3.5-liter, 3,471 cc V6 engine. The filter selection follows the engine actually fitted rather than the vehicle name alone. A service inspection confirms the correct application without naming a part number or filter specification.

• 2.4-liter engine: four cylinders
• 3.5-liter engine: six cylinders
• Filter selection follows engine application

The filter holds debris removed from the oil and can eventually load enough for its bypass valve to open. Whether additional service is appropriate depends on the manufacturer’s schedule, an inspection, and the vehicle’s service history. Replacing the filter alongside the oil provides fresh filtration for the new oil.

• The filter’s job is to hold oil-borne debris.
• A loaded filter can permit unfiltered oil circulation.
• Service history helps determine the next service.

Use the schedule appointment link to request service for your 2014 Honda Crosstour at the Frisco location. The team can match the filter to the 2.4-liter four-cylinder or 3.5-liter V6 engine and complete the leak check after the engine runs.

• Online scheduler: service appointment request
• Phone: 469-405-3754
• Address: 1601 N. Dallas Parkway, Frisco, TX 75034