2016 Honda Civic Tires

The published maintenance schedule calls for rotating or adjusting air pressure on the wheels and tires every 10,000 miles. Regular inspections can also identify uneven wear before the next scheduled visit. Service history and tire condition help determine whether additional attention is appropriate.

• Rotation supports more even wear across the set.
• Pressure is set to the vehicle placard specification.
• The tire pressure monitoring system is reset after service.

The inspection also helps identify uneven wear and supports a recommendation for rotation or replacement based on the tire condition. The applicable rotation pattern depends on the vehicle and the tires fitted. You can schedule service at David McDavid Honda of Frisco.

• All four tires receive a tread-depth measurement.
• Rotation follows the manufacturer-specified configuration.
• Pressure and monitoring-system settings are addressed afterward.

The vehicle’s drivetrain and the tire design must be confirmed before the tires are moved. Directional tires may limit movement to one side, while staggered fitments can use different front and rear dimensions. A technician checks the tires actually fitted and applies the manufacturer-specified pattern for that configuration.

• Drivetrain affects how tires should be repositioned.
• Directional tread can restrict the direction of movement.
• Staggered fitments can change front-to-rear interchangeability.

A tire inspection can compare tread across the set and identify uneven wear or damage. On an all-wheel-drive vehicle, mismatched tread depth can load the driveline, which is why replacement decisions differ from those for a two-wheel-drive vehicle. The vehicle configuration, tire condition, and service history determine the appropriate recommendation.

• Compare tread condition across all four tires.
• Check for uneven wear and visible damage.
• Use the fitted tires and drivetrain to guide replacement planning.

Uneven tread wear across the set and vibration at highway speed are additional reasons to arrange an inspection. Tread depth measurement on all four tires shows how the set is wearing. Replacement recommendations should be based on what the inspection finds and how the tires are fitted to the vehicle.

• Look for a molded tread-depth indicator level with the tread.
• Use a penny test as a general tread check.
• Arrange an inspection for uneven wear or highway-speed vibration.

Booking provides tread-depth measurement on all four tires and a rotation or replacement recommendation based on what the inspection finds. The dealership is located at 1601 N. Dallas Parkway in Frisco, TX. You can also review current service specials before booking.

• Request tire service through the online scheduler.
• Call 469-405-3754 for booking assistance.
• Visit the service team at 1601 N. Dallas Parkway, Frisco.