2019 Honda Insight Oil Filter in Frisco, TX

The manufacturer’s published maintenance schedule for this model year calls for oil filter replacement every 20,000 miles. Replacing it with the oil prevents a loaded filter from being carried across two oil changes. The vehicle’s service history and an inspection can also help determine the appropriate service timing.

• Filter replacement is completed alongside the oil.
• The filter captures debris carried by the engine oil.
• David McDavid Honda of Frisco can check the service history.

The filter is matched to the 1.5-liter, 1,498 cc inline-four engine. Renewing the gasket or washer supports the drain plug seal during the oil service. After the engine runs, the technician checks the filter seal for leaks.

• Filter matched to the engine’s specification.
• Drain plug gasket or washer renewed where the engine uses one.
• Filter seal checked for leaks after operation.

The engine still receives oil, but it may no longer receive filtered oil. That can allow debris held by the loaded filter to be bypassed, which is why the filter is replaced with the oil rather than stretched across two changes. Inspection and service history help determine the next appropriate service.

• The filter continues collecting debris until it loads.
• The bypass valve can allow unfiltered oil circulation.
• The engine may become noisier or trigger an oil-pressure warning.

A correctly matched filter is selected for the engine actually fitted to the 2019 Honda Insight. Engine design and application determine whether a filter is suitable; a filter intended for another engine should not be substituted simply because it fits physically. David McDavid Honda of Frisco can match the filter during service.

• Engine: 1.5 liters and 1,498 cc.
• Engine layout: inline-four.
• Filter selection is completed as part of the service.

The filter holds debris from the oil, and a loaded filter can open its bypass valve so unfiltered oil circulates. Carrying that filter into another oil change reduces the benefit of fresh oil. The manufacturer’s published maintenance schedule for this model year calls for filter replacement every 20,000 miles.

• Fresh oil does not remove debris already held by the filter.
• A bypass valve can permit unfiltered oil flow.
• Service history helps determine what is due next.

Choose the service scheduler and request oil and filter service for your 2019 Honda Insight. The dealership can fit the filter to the 1.5-liter inline-four engine, replace the drain plug gasket or washer where applicable, and check the filter seal after the engine runs. You can also review service specials before booking.

• Schedule online through the dealership service scheduler.
• Call 469-405-3754 with service questions.
• Visit 1601 N. Dallas Parkway, Frisco, TX 75034.