2013 Honda Accord Tires in Frisco, TX

Regular visits help catch uneven wear before it becomes more pronounced. The actual condition of the tires and the vehicle's service history also help determine what should happen next. An inspection can confirm whether rotation is appropriate.

• Rotation helps distribute front-to-rear wear.
• Tread depth should be measured on all four tires.
• Uneven wear or vibration warrants service attention.

The inspection compares wear across the set and helps identify whether rotation or replacement is the appropriate recommendation. The rotation follows the pattern the manufacturer specifies for this vehicle. The tires actually fitted determine the final service recommendation.

• All four tires receive a tread-depth measurement.
• Pressure is set to the vehicle placard specification.
• The monitoring system is reset after pressure service.

The manufacturer-specified pattern is used for the vehicle and tire configuration inspected at the appointment. Directional tread can limit where a tire may move, while staggered fitments can change the possible positions. The tires themselves and their current wear determine the correct approach.

• Front-wheel drive gives the front tires steering and driving duties.
• Directional tread can restrict tire movement between sides.
• Staggered fitments can change the available rotation positions.

A two-wheel-drive vehicle does not have the same all-wheel-drive driveline concern caused by mismatched tread depth, but replacing tires as a set may still be appropriate when wear is similar or several tires show damage. An inspection compares all four tires before a recommendation is made.

• Compare tread depth across the complete set.
• Check for uneven wear, damage, or vibration concerns.
• Base replacement decisions on inspection results.

Uneven wear across the tread and vibration at highway speed are also reasons to schedule an inspection. A technician can measure all four tires and compare their condition. The tires' actual condition, rather than the vehicle model alone, determines whether replacement is recommended.

• Look for a tread-depth indicator level with the tread.
• Use the penny test as a general condition check.
• Arrange inspection for uneven wear or highway vibration.

The visit includes tread depth measurement on all four tires and a rotation or replacement recommendation based on what the inspection finds. David McDavid Honda of Frisco is located at 1601 N. Dallas Parkway in Frisco, TX. Review service specials when planning your visit.

• Schedule online through the dealership appointment page.
• Call the service team at (469) 405-3754.
• Have all four tires inspected during the visit.